Best Methods To Mount Your TV On The Wall

May 6, 2020

Not many property holders are too vigilant to even consider taking on the basic undertaking of balancing something on the divider. Just blast in a nail, set up the thing, and you’re good to go.

It’s not exactly as simple when mounting a TV. On the off chance that you don’t finish this procedure accurately, the costly thing may come slamming down into ruin. More awful, an inadequately mounted TV could cause genuine injury in the event that it falls on a pet or little kid.

You don’t need to adhere to the conventional strategy for keeping the TV on a household item, however. By tying down the gadget to a divider, you can open up more space, decrease mess, and build up an increasingly smoothed out look in a room. It’s fundamental that you require some investment to appropriately finish this procedure, however.


Prior to mounting your TV, as instructed at, choose where in the room it ought to be found. The home improvement site HomeAdvisor says you’ll get the best survey understanding on the off chance that you can set it up at eye level in a spot where you won’t watch the screen at a point.

The area ought to likewise be advantageous. Jake Sherman, composing for the home tech organization Puls, says the links ought to have the option to arrive at a close by outlet or some other associated gadgets; this will likewise permit you to all the more likely disguise any wires or links. The TV shouldn’t be in a territory where it will be presented to extreme glare from daylight.

While the territory over a chimney mantle is frequently considered for TV position, it’s normally not a decent decision. This site will be significantly higher than eye level, making you strain your neck while watching a program. The TV can likewise be harmed by warmth and sediment on the off chance that you much of the time utilize your chimney.

So also, movable mounts can let you set up a superior survey point than mounts that keep a TV level against the divider. The magazine Family Handyman says mounts that tilt the TV descending permit you to drape them at a higher stature, while full-movement mounts additionally permit you to turn the gadget so you don’t need to watch it at a point.

Preferably, you can get a few companions or relatives to assist you with deciding the best TV arrangement. While one individual sits in where you intend to sit in front of the TV, the other two can hold up the gadget against the divider and move its area until the sitting individual says they’ve discovered the best spot. Imprint the edges of the TV so you’ll realize where to mount it.

You can likewise have a go at utilizing a substitute for the TV. Kindig says a huge bit of paper or cardboard attached to the divider can assist you with deciding the best possible area and ensure there will be sufficient help to hold up the TV here.

tv wall mount

Discovering support

The mount you use ought to be evaluated to convey the heaviness of your TV. Michael Franco, composing for the home improvement proficient Bob Vila, says the maker may sell a mount intended to go with the gadget, or you can utilize an all inclusive mount adequate to hold the heaviness of your particular model.

You’ll have to ensure that the TV mount is safely joined to a stud, not simply held tight the drywall. TVs that are under 80 pounds can regularly be swung from one stud. Heavier ones should be mounted to in any event two studs.

Utilize a stud discoverer to discover where you can mount the TV. HomeAdvisor prescribes utilizing a pencil to check the focal point of a stud, at that point tapping a nail mostly into the divider to ensure you’ve discovered the perfect spot.


Divider mounts for the most part comprise of a mounting outline that should be connected to the divider and a section that joins to the TV. Kindig suggests having an assistant hold up the edge so you can utilize a level to guarantee that it is even, at that point mark the spots on the stud where you’ll connect the mount. You should then bore into the divider and secure the edge with mounting jolts.